Rotary Band Saw Machine

The GHZ-4060 has a free rotating worktable and can move the cutting head between three positions: 0°-45°; it supports both left and right rotations of the cutting head in these positions. Precise positioning of the worktable and cutting head, stable clamping with a digital angle display and an auto-locking mechanism driven by hydraulics; Position error within 0.02mm in this range. The angular change process is simple and efficient; The scale display is clear, operation is convenient; At this time there are no other position-fixing devices required to save adjustment time greatly and improve the overall processing efficiency.

Adopting a strengthened dual-column structure with an increased base thickness and using high-precision linear guide to reduce vibration caused by the swinging motion of the saw frame in angle-cutting operations. A hydraulic dual-use fixed size tool can precisely fix a workpiece, prevent it from moving due to rotation, and cut smooth without burrs. The saw-blade guide also employs high-hardness alloys to ensure its own stability and extend the service life of the replacement; In addition, there is a continuous-suction mechanism for cleaning chips off after each cut.

Using a 5.5-kW high-efficiency primary motor, a 1.5-kW electric-hydraulic coupling device, and a 0.125-kW coolant pump to ensure stable performance under all operating conditions and heavy loads in cutting tough metal parts precisely. There are four Optional Saw-Blade Speeds of 25, 40, 65, and 80 metres per minute; adjust it flexibly in combination with the material type and thickness for maximum cutting Efficiency and Quality. A Type 6500*41*1.3mm saw blade is made of a high-quality bi-metallic alloy steel after being precisely heat-treated and tooth-ground for increased sharpness, durability against wear, and extended service life. A machine with an integrated automatic-semi-automatic operation mode, which can complete the task in several operations of manual/automatic, such as low-volume and batch precision processing or mass production of relatively stable blank size.

The GHZ-4060 is of small size but sturdy and the layout is appropriate, therefore this type can be used in some smaller-medium workshop environments. Centralized PLC controller, with a digitalization interface for parameters adjustment, Angle changes and the management of other tasks requires basic working knowledge to operate. Several Safety Functions include an Emergency Stop Switch, a short-circuit disconnection Detection Unit for the breaker, An Overload- Protection Module, And A Safety Barrier That Meet The International Standards Of Safe Working Practices. An auto-circulating cooling system equipped with a 250L capacity tank constantly sprays coolant onto the saw blade and work-piece to reduce friction and wear, lower blade temperature, extend its service life. Daily upkeep tasks are straightforward: regularly add lubricating grease to moving parts, clean the cutting area and inspection of the cooling-water system.