Manual Turret Milling Machine

The X6332 model is fully manual; The operator has complete control over each link in processing: setting the feeding speed, Cutting depth and spindle Speed.Manual control can be chosen for precise Processing, individual Workpieces or mould Repairing Tasks requiring minor Adjustments to achieve High Accuracy and good Surface Finish. There is a small-handled wheel on the machine which can adjust the force accurately; Tumbling Head Micro-rotation Function, used for drilling and fastening nuts workpieces precisely with reduced worker workload over prolonged hours through its continuous use.

It is an excellent option for smaller companies, workshops, training institutes, etc. Its Structure is simple, few electrical and Mechanical components reduce failure Rates and Maintenance Costs. Ergonomic Hanging Control Panel With Clear Operation Indicators to Help Beginners Operate It Easier. Optional parts include a dividing head and three-dimensional digital measurement units, etc., and can be used for processing work that has many different types.

Mainly composed of the bed, Work-piece table and column in X6332, which is a type of high-grade cast iron after artificial ageing to eliminate internal stresses, with good stiffness and anti-shake performance. Worktable and guide path parts are ultrasonic hardening beyond 50 HRC hardness, thus preventing surface abrasion damage for extended use periods. A 1370 × 320mm enlarged work-piece table with a maximum load of 380kg can bear processing large-scale small-to-medium-sized metal parts, including mould bases and some auto-accessory components without warping. A set including the following: 7:24 ISO40-taper in vertical connection with a MT-tapper, both having been accurately honed for high precision rotation.

X6323 has adopted a new general-purpose turret and differs in design from the earlier models that were solely manual turrets. Turret head can rotate ±90° horizontally and be tilted ±45° both forward and backward; The ram rotates 360 degrees horizontally and quickly switches between vertical and horizontal milling mode without re-positioning the work-piece. The dual-milling function can be used for both vertical processing, including plane, groove and hole-drilling operations, as well as horizontal Processing, such as cutting and gear milling; spline-processing etc. Turrets can hold several tools at the same time when installing them; A single clamping operation can accomplish milling,drilling, bored reamed hole processing, etc., so its efficiency is higher than ordinary hand-operated millers.