Universal Turret Milling Machine

X6336 has added a better-equipped universal turret in its design and is thus distinct from other models of turret mill. Turret Head can rotate ±90° horizontally and ±45° front-back; Ram can rotate 360° horizontally to switch quickly between Vertical mode and Horizontal mode without adjusting the position of the work-piece. The two-milling function can be used to process planes, grooves and holes vertically, as well as gears, splines and other surfaces horizontally; it thus increases the processing range substantially.Turret tools that hold a group of cutting inserts for multi-tool and Various process functionalities under one-chucking-action, effectively shortening changeover time by up to 42% compared with ordinary single-mode applications.

The primary components of the X6336 include the bed, worktable and column, which have been manufactured from high-strength cast iron using an artificial ageing process to eliminate internal stress; To ensure good rigidity and anti-vibration properties.The X/Y/Z-axis guide ways use a wide-rectangle dovetail structure lined with wearable material; The worktable and guideways have been treated with ultra-low-frequency quenching (hardness above 50 HRC), and their precise processing to reduce wear for extended accuracy. The 360 x 1,500 mm extended worktable has a maximum weight that can be borne by it to achieve this size.

X6336 can be set to automatically or manually perform a precise, speedy operation on the work-piece. Mechanical feeding rates, ranging from 22 mm/min to 555 mm/min, and a maximum rapid traverse speed as high as 830 mm/s are all feasible. The vertical spindle (ISO40:24) reaches the top rotational speed of 4540r/min ; The Horizontal Spindle ISO50:24 is accelerated from zero to 1800 r /min.

Compared to multi-axes machine tools and large universal millers, the X6336's initial investment and operating costs are approximately one-fourth of these equipment, so it is very suitable for medium-sized enterprises. Plane milling, groove milling, Gear milling, Hole Drilling,Boring and Reaming Tapping, etc. It is suitable for a variety of parts. Optional items are divided into three parts: 3-Digit Digital Readout(DRO) system, Power Feed System, Dividing Head and Rotary Table; And the air-bow System can be added according to requirements. An automatic central-lubrication have been introduced to safeguard critical elements, reduce upkeep expenses, and extend the machine's life.