Industrial Horizontal Band Saw

In the structure design of GH4250, a two-column vertical type has been adopted to enhance equipment reliability and safety during replacement operations by placing it below. A strong steel saw frame within a dual-column guiding system increases stability; a hydraulic work piece clamping mechanism holds tightly onto heavy objects that are not moved by external forces during cutting to ensure uniformity of the cutting accuracy ±0.03 mm.

GH-4250 design has a certain degree of stability and is more suitable for handling heavier loads of metallic goods. A clearly Label central control panel that facilitates adjustments of parameters and operations, suitable for people unfamiliar with industrial processing to operate. Mainly used as the drive mechanism for a worm Gear to ensure high accuracy; In addition, A centrally positioned oil pump supplies constant pressure to the actuator continuously. For the maintenance of typical equipment, lubricate the rotating parts regularly to keep them smooth and avoid dirt entering by hand frequently from outside; Check periodically that cooling performance is adequate.

It comes standard with a 5.5-kilowatt high-efficiency primary motor, 0.75 kilowatts hydraulic motor and 0.09 kilowatts coolant pump; The G H4250 has the capability for continuous operation under fixed loads in cutting operations of diameter up to D=500 mm without interruption. Three-level adjustable saw blade speed settings of 27m/min, 45m/min and 69m/min are provided; Adjust through hydraulic steps-to-noise gear for use with various metal sheets or plates at different thicknesses. A saw-blade of 5800 millimetre x 41 millimetre x 1.3 mm in size, made from high-quality alloy steel after precise heat treatment to ensure it remains keen, durable and long-lasting; Additionally provided are a hand-operated Blade Tighten Device for easy and quick Clamp or replacement.

The GH4250 is designed with a reasonably optimised chip-removal channel to ensure smooth chip discharge at high speeds; thus, chip buildup will not impede the cutting performance. The self-cleaning cooling device continuously sprays water on the saw blade and work piece to reduce friction, extend service life, delay overheat of the saw blade, produce burr-free cutting pieces without further processing after cutting. The machine can operate in either a manual or semi-automatic mode; The semi-automatic Mode has achieved automatic feeding, Cutting And Return of the saw frame, thus increasing batch-processing speed and labour-saving For Large-Scale Production.