Tck56 Slant Bed CNC Lathe Machine

Essentially, the slant base structure of CNC milling machine with model TCK56 is inclined at 45 degrees to enhance stability and range compared with traditional parallel type whereas it still holds certain degree of compact size. A high-quality HT-300 cast iron; it goes through three stages of artificial age-testing to eliminate all internal stress and cannot be damaged by vibration during long-term use due to repeated impacts. A 3700~4500 kg gross weight can provide sufficient stability to process items stably without deforming.

Due to the slope design of its bed, it has an advantage over traditional flat-bed lathes in chip removal. During the processing, chips and cooling liquids fall naturally into the installed automatic chip conveyor through gravity; they accumulate no chips on site to protect guide rails and spindle components from blockage, reduce thermal deformation for better continuous operation of automation,etc.Reducing manual clean-up Time by 80 per cent can improve Processing Speed Significantly Extend Tool Lifespan significantly.

High-performance CNC systems have been used in the research project: standard GSK or optionally Siemens, FANUC or KND, programming function; Program verification; Parameter memory to enhance user experience. The 12-station turret achieves an ultra-low-tool-change latency of 0.2 - 1.5s to shorten idle-time. A 11-15 kw high-power variable-frequency motor drives the spindle , at speeds ranging from 50 rpm to above 4, 500 rpms without gears and can handle various materials efficiently. The feed system uses pre-loaded high-precision ball screws to ensure an X, Z-axis positioning accuracy of±0.01mmand repeatability±0.003 mm; It has reached its strictness in the target for complex workpieces manufacturing.

A 45-degree inclination of the base can provide a comfortable operation Angle for workers to reach the machining Area and operate smoothly Control Panel . To a large extent, an entire enclosures protect operators from getting cut by the cutting fluid or chip inside during operation.[8] An automatic central-lubricate system performs point-quantity oiling on the guideway and ball-screw components to reduce wear and lower maintenance expenses.Modular Design and intelligent fault codes for quick diagnosis; A small form factor reduces occupation in workshop areas relative to general flat-bed lathes of similar specifications.