Shandong TaoFong CNC Machine Tool Co., Ltd. is one of the leading manufacturers and suppliers of hmc50 horizontal machining center in China, also supports customized service. Welcome to buy high quality hmc50 horizontal machining center for sale here from our factory. Good service and reasonable price are available.
HMC50 Horizontal Machining Center has been designed to ensure both good positioning accuracy and a modest price level. Different from the vertical machining center and large horizontal type, it has a transverse sliding seat structure with a small size to save installation Space And maintain efficient Multi-Processing ability. Mainly used to process a variety of metals, including carbon steel, alloy steel, aluminium alloys, copper Alloys, mould steels; It can also adapt to the processing requirements of some high-performance non-Metallic Materials, providing a flexible Processing Solution with good stability at a low Cost for Small and Medium Enterprises, Workshops , Research institutes.
Product Advantages
Compact Layout & Space-Saving
The HMC50 has a crossed-slide structure that is smaller in size compared to the same-sized vertical Machining Center; The general Dimensions are approximately 4650*3250*3000 mm, And its nominal Weight is around 6800 kg . It has a small size and can be installed in small workshops or production lines with tight spaces; at the same time, it can ensure the installation of a wide range of conventional horizontal Machining centers.
High Cost-Effectiveness & Easy Operation
Compared with large horizontal milling centres and imported equipment, the HMC50 has a relatively low price, similar machining performance, but it provides cost-effective processing functions for small-, medium-sized production workshops. It has a simple, easy-to-use, and highly accurate NC system that optionally comes with brands such as Fanuc-OI MF Plus, Siemens 828D or Mitsubishi M80B; it provides good operability to users; The automatic concentrated lubricating system can also lower maintenance expenses and extend the lifespan of important parts.
High Precision & Stable Performance
The machine tool bed and column are fabricated from high-quality HT300 cast iron after rigorous vibration ageing to eliminate all residual internal stress; consequently, both the structural stiffness of it is increased significantly, thereby ensuring dimensional accuracy. Equipped with a BT40 spindle, preloading C3-class precision ball screw(PMI/Hiwin) and heavy-duty linear guide path to achieve a positioning accuracy within ±0.008mm/300 mm and repeatability ±0.005mm . A 11 kw spindle motor provides sufficient torque to drive a high-speed spindle at up to about 8000 r.p.m and as low as approximately 0 r.p.m.
Efficient Multi-Surface Machining & Flexible Configuration
In contrast, vertical Machining Centers need to be repeatedly clamped during multiple surface operations; However, the horizontal layout of the spindle in the HMC50 makes it possible to perform a single setup task (milling/drilling/tapping/multi-angle) at once. A standard tool magazine contains 24 discs, and the tool-change time is approximately 3-3.45 seconds; it has reduced the non-operating Time. Can also be added with special attachments, including boring heads and Angle-milling Heads, which increases the application range of this machine tool .
Product main technical parameters
|
SPECIFICATIONS |
Units |
HMC50 |
|
Table size |
mm |
500*500 |
|
X axis travel |
mm |
1100 |
|
Z axis travel |
mm |
600 |
|
Y axis travel |
mm |
700 |
|
Distance from spindle center to table surface |
mm |
145-725 |
|
Distance between spindle nose and table center |
mm |
120-700 |
|
Table quantity |
pcs |
1 |
|
T slot(number-width*pitch) |
mm |
5-18*100 |
|
Max. worktable load |
kg |
500 |
|
Table indexing |
° |
1°*360 |
|
Maximum speed of table |
r/min |
10 |
|
Main motor power |
kw |
11/15 |
|
Spindle taper |
BT40 |
|
|
Max. spindle speed |
rpm |
8000 |
|
Cutting feed speed |
mm/min |
1-10000 |
|
Rapid traverse speed |
m/min |
36/32/32 |
|
Tool magazine |
Arm 24 |
|
|
Max. tool diameter |
mm |
112/200 |
|
Max. tool length |
mm |
400 |
|
Max. tool weight |
kg |
18 |
|
Tool change time (tool to tool) |
sec |
3 |
|
Machine minimum setting unit |
mm |
0.001 |
|
X,Y,Z axis positioning accuracy |
mm |
0.01 |
|
X,Y,Z axis repeat positioning accuracy |
mm |
0.005 |
|
B axis positioning accuracy |
″ |
10″ |
|
B axis repeat positioning accuracy |
″ |
5" |
|
Machine weight |
kg |
7500 |
|
Overall dimension(L*W*H) |
mm |
4650*3250*3000 |
Machine Standard Details
MACHINE CONSTRUCT
High strength high quality HT300 cast iron
CONTROL SYSTEM
Standard: syntec control system
TAIWAN PRECISION SPINDLE
1. Taiwan spindle BT50 6000rpm
2. Passed dynamic balance ISO rating test
TAIWAN TOOL MAGAZINE
1.Taiwan arm 24 tool magazine .
2. tool change time only 2-3 seconds.
1 Famous brand lead screw,
2. lead screw bearing using SKF or NACHI bearing,
3. coupling YC directly connected
TAIWAN PRECISION LINEAR RAILS
1. Taiwan high speed roller linear guide rail, positioning accuracy can reach μm class
LUBRICATION SYSTEM
HERG Automatic centralized lubrication device .
PNEUMATIC COMPONENTS
Standard with AirTAC Pneumatic Components
1. with Schneider safety electrical components
2. Quick plug as standard
Each machine passed Renishaw laser interferometer testing and ballbar testing
Application Scenarios
Precision Electronic & 3C Components Manufacturing: The HMC50 has been used extensively in the manufacture of low-cost electronic devices and three-terminal circuits for precision components such as accurate shaft pins, 5G communication modules, etc. Its excellent high-precision and lightweight characteristics make it particularly appropriate for low-cost mass production applications of precise components in electronic device manufacturing to ensure consistent quality of products.
Automotive & Motorcycle Small Parts Processing:Processing small automobile and motor vehicle parts, including engine accessories, brake parts and some frames of motorcycles . One-time clamping multi-surface machining ability can improve production efficiency and reduce manufacturing costs; It is suitable for automobile and motor support enterprise products with a certain batch size. .
Small Mold & Die Industry: Suitable for processing small mould , mould inserts and other parts of the mould, including plastic injection mould , small-stamping-mould and electronic-product-mould . Machine accuracy can ensure that the mould cavity and core have good precision; secondary polishing are reduced and processing speed is increased.
R&D Institutions & Vocational Education: Suitable for perfecting R&D institutes and vocational schools in experiments and teaching. It is suitable for prototyping processing, process improvements and the training of professional CNC operators to provide practical technical support in talent cultivation and technological innovation.
General Machinery & Small-Batch Production: Adjusts for multi-variety, small-batch production of general mechanical components, including small gears, shafts, sleeves, non-ferrous metals and other materials. Its compact structure, easy flexibly Configured , Low Maintenance Cost Suitable For Small Workshops And Enterprises With Diverse Processing Requirements .
FAQ
Q: What are the key specifications of the HMC50 Horizontal Machining Center?
A: The standard size of the Work table is 500*500 MM; Maximum Load: 500-800KG. X-axis: 100 mm; Y-axis:600 mm; Z-axis: 700 mm. Spindle Speed: 40-8000 rpm; Positioning Accuracy: ±0.008 mm / 300 mm; Repeated Positioning Error: ±0.006 mm .
Q: What is the tool change time and can the tool magazine be upgraded?
A: A standard 24-position disc-type tool storage box, with a tool-change time of approximately 3~3.45 seconds. Can hold tools weighing up to 16-18kg, have a maximum diameter of about 112~200mm, and be at most long as approximately 300~400mm. The tool magazine can be increased based on actual requirements .
Q: What materials can the HMC50 process, and is it suitable for small workshops?
A: Mainly processes metal Materials, such as carbon Steel, alloy Steel, Aluminum alloy, Copper alloys and mould Steel; Also processes Engineering Plastics. Yes, Its Compact Size (4650*3250*3000mm), suitable for small Workshops of Limited Space, yet maintains the required efficiency and precision in operations.
Q: What after-sales services are provided, and what is the warranty period?
A: Warranty period has been set to 12 months (optional: 18-monthly); major components include the spindle assembly, linear guide rails, ball screw units along with CNC system. Provide 24-hour-overnight technical support, on-site repair services, supplies genuine spare parts, offers operator training for free, conducts a video pre-delivery check.
Q: Can the HMC50 be configured with a rotary table, and what is its power consumption?
A: Yes, there is a non-recoverable optional servomotor-driven rotation table of Φ320/Φ400mmthat supports multiple angles in machining. Spindle motor power: 11 kW; Reasonable total power consumption, suitable for extended periods of operation without excessive energy loss.
Hot Tags: hmc50 horizontal machining center, China hmc50 horizontal machining center manufacturers, factory
