Aluminum 5 Axis CNC Milling Machine

AMC700 is a low-cost aluminium special purpose five-axis ; it features two motors: one directly powered by DC electricity and the other supplied via brushed winding to increase power output Through brushless technology . Realize one-time clamping to achieve multi-angle and multiple-faced processing of aluminium work-pieces; It eliminates accumulated deviations brought about by repeated clamps and reduces rejection rates below 0.8% - Solving the deformation problem of thin-walled aluminium components in Multi-clamp effectively.Equipped with intelligent thermal error compensation technology and aluminium-specific cutting parameter tables to adjust the cut-off speed and travel distance autonomously;

The overall dimensions are 2800*2500*2900 mm and its net weight is about 11t; It has a small-sized vertical form, needing merely 16-20 square feet to occupy the ground space in workshop environment or C-grade electronics manufacturing factory. The dimensions of the 700×700mm worktable are suitable for supporting the processing of small- to medium-sized aluminium work-pieces, including aluminum alloy shells, thin-walled parts and aluminium mould. Standard configured with a 36-station arm-type tool magazine that can complete tool changes in just two-and-a-half seconds and support multiple processes such as milling, drilling, roughening holes, tap-threading on aluminium parts . It provides a selection of aluminium-chip removal robot or vacuum clamp device, can meet requirements at different times.

AMC-700 is equipped with a direct drive of 15 kilowatts power that supports maximum cutting speed as high as 12000RPM and can be driven at the fastest Speed according to users' demand in order. Aluminum processing in the 3+2 position mode is used for short, stiff cutters to reduce vibrations when cutting; thus, this method can increase aluminium cutting productivity by up to 50%.

Compared to fully seven-axis aluminium-processing machines, the AMC700 has a 35 per cent lower initial investment and operation costs; Therefore, It Is Suitable for Small-And-Medium Enterprise Manufacturers of Aluminium Products. , A convenient 3+2 position control program is available; optional models include Fanuc, Siemens and GSK series CNC systems; an aluminium processing parameter library includes pre-installed settings for six standard aluminium types: 6061-T3, 7075-T4/5/6/9-RC, 5052. Three-axis aluminium-cutting operators are accustomed to it relatively soon after learning, so they can reduce training costs for the enterprise .