3 Axis CNC Vertical Milling Machine

VMC1160 has an cast iron baseplate and a strengthened column; it is also internally ribbed after undergoing the third artificial aging step. To minimise vibrations and deformations of this structure under high speeds or heavy loads for continuous operation. ; The spindle is driven by a belt, has a shock absorption device to reduce noise and vibrations, a full-seal design prevents chips and cooling liquid from intruding, prolongs the lifespan of the spindle, maintains good rotational accuracy, etc.

which has its own forced heat-dissipation system to isolate the heat source and ensure the stability of electrical component operation under high-temperature work conditions. Optional spiral chip conveyor and large-capacity chip collection boxes are used to rapidly transport away the chips to avoid chip blockages; provide a comfortable operating environment. It has several safety guards, such as an immediate-stop button, overloading device of the spindle, tool-collision protection switch, a fully enclosed protective door, to safeguard workers' lives and prevent chips from splattering. varied operating habits and different materials to be processed by other users.

Three-axis motion is enabled by highly precise C3-ball-screw systems and roller-linear guideway with preload compensation functions; The three axes have good smoothness, precision, speed, with a positional error less than 0.008mm and repeatability in this range being within 0.006mm. A BT40 high-speed spindle driven by a 11KW AC servo motor has very low run-out (≤0.005mm), good cutting force, stable axial positioning accuracy for heavy-duty pieces, etc. Optional A built-in intelligent temperature Regulation Module that can monitor changes in the component's temperature through embedded sensor Technology and dynamically adjust the Processing Parameters based on this data to eliminate Temperature drift OverTime for continuous High Precision operation at Conditions above Expectations..

VMC1160 has the GSK CNC system with a large display of 10 inches in size; It supports G code programs, program checking functions, faults can be diagnosed automatically for ease of use and reduced manpower investment cost. The Tool-Changer time was just 4s, reducing useless Time by that much and increasing production Capacity as a result. Supports a full-automatic, semi-automatic and manual working modes; Also provided is a central control automatic-lubrication system that has an oil level alarm function for providing necessary oils to enhance equipment life. The maximum quick traverse speed is up to 24m/min, reducing the processing time for mass-production large work-piece batches.